For all your needs from Research to Production. The versatile design allows for growth and
requirement changes without having to revalidate new equipment.
■ Supplied by Wheaton in USA
■ From 5 to 55 position per unit (holds 10 to 110 of the 850 cm2 vessels)
■ Modular, add capacity and options as your requirements change
■ User friendly control : Displays accurate RPM by entering vessel diameter
■ Wide speed range 0.25 to 8.75 RPM
■ All Position Drive System
■ Programmable rotation direction, better for fluted roller flasks
■ Programmable soft start and stop
■ 10 program storage registers
■ Built-in Rotation Alarm (visual, audible, with external jack)
■ Optional temperature monitoring, 1 to 4 sensors per unit
■ Optional battery backup, complete functionality for up to 18 hours
■ CART2 ready! Optional computer software for monitoring, controlling,
and recording up to 2,047 units

The Wheaton R2P Roller Culture Apparatus is designed to allow for the development and
growth of cell culture from research to production quantities without having to change equipment
and revalidate. This is achieved by providing the operator more flexible controls, the ability to
easily add at any time, and the ability to start with as little as on deck(5 positions for bottles) and
add decks up to total eleven (55 positions for bottles).
The programmable rotation of the R2P allows cells to grow over the entire surface of
longitudinally fluted flasks. Longitudinally fluted flasks have more surface area and allow easier
cell removal than equatorially fluted flasks. Each roller is rotating to allow for either glass or
lighter weight plastic roller culture vessels to be used.
The large digital display and keypad allow for easy input and monitoring of the setting. The unit
continually displays the bottle RPM setting and the actual bottle RPM. The display remains
accurate with any size bottle(110 to 121 mm diameter) by entering the bottle diameter.
The unit continuously monitors both the rotational speed and the drivetrain(the motor and belts).
If the speed falls out of the entered tolerance or if the unit detects a loss of rotation, the unit
displays an alarm, and sounds a loud buzzer. These alarms can be tied to an existing
monitoring system through an external jack.

특징 (Features)
* Deck (Bottle position 5개) 하나부터 11 Deck(55 positions)까지 System의 규모를 자유롭
게 조정할 수 있어 연구용부터 대규모 생산을 위한 Cell Culture 까지 다양한 작업 수행 가능.
* 각 Roller가 모두 회전하는 All Position Drive System으로 가벼운 플라스틱 배양병도 회전 가능.
* 하단에 장착된 롤러(Roll-in incubator Cart)를 이용하여 자유롭게 이동 가능
* Large Digital Display & Keypad : 화면에 입력된 Bottle rpm과 실제 Bottle RPM을 지속적으로 표시해
* Accurate Control :
ㆍ 용이한 조절장치 : 선명한 Keypad와 Digital Display를 통한 손쉬운 입력과 설정
ㆍ Bottle의 직경을 입력하면 정확한 RPM Display
ㆍ 부드러운 출발/정지 조절, 10 Program 저장/등록 가능
ㆍ 양방향으로 회전 가능하며, Time Interval을 입력하면 일정 시간 후 자동으로 Reverse 됨.
ㆍ Programmable Soft Start/Stop으로 Premature Cell의 이탈 방지.
* Built-in Monitoring & Alarms :
ㆍ Rotation Speed와 Drivetrain(Motor, Belts)을 계속 모니터하여 회전속도의 오차가 입력된
허용범위를 넘거나 회전에 문제가 발생되면 Alarm이 Display되고 크게 Buzzer가 울림.
ㆍ 이러한 Alarm 기능은 외부 Jack(R45)을 통해서 사용중인 다른 Monitoring System에 연결 가능.
* 별도로 공급되는 Accessories를 통하여 다음과 같이 기능을 향상시킬 수 있음.
ㆍ Temperature Monitoring Option : 정밀한 온도 감시 기능
ㆍ Battery Backup Option : 정전시 18시간까지 사용이 가능하게 함.
ㆍ CART2 Control, Monitor, and Recording Option : 2,047 R2P Unit 까지 감시/조정/기록이 가능

규격 (Specifications)
* Bottle Size : Φ110 ~ 121×L550 mm 까지의 모든 Glass / Plastic Bottle
* Bottle Speed : 0.25 ~ 8.75 rpm (Φ110 mm Bottle 기준)
* Accuracy : ±0.01 rpm (Special Speed Ranges Available on Request)
* Built in Drive Monitoring System Alarms
ㆍ Visual : Flashing Display with Fault Displayed
ㆍ Audible : Buzzer (with On/Off control)
ㆍ External Output : NO or NC (Programmable) Dry Contact (0.5A @ 24 VDC)
Through R45 jack on the control housing front panel.
* Dimensions : w787×d622×h343 mm(Drive unit with 1 Deck), Deck 추가시 높이 15.25 cm 추가.